Sales department
Fiber optic cable:
Fiber optic cable incorporated in ground wire:
(8342) 47-38-13, 48-02-99, 48-03-55 | Phones Services
Production » Outdoor cables » ADSS CABLES » OKKMS cable

OKKMS cable

Fiber-optic cable OKKMS with fiberglass yarns without inner PE jacket for suspension on urban lighting pillars.


OKKMS is designed for construction of overhead power lines with voltage up to 12 kV;between buildings.

  1. Central strength member – fiberglass reinforced rod
  2. Optical fiberо
  3. SZ stranded loose tubes filled with hydrophobic gel
  4. Fiberglass yarns
  5. Protective jacket
  6. * longitudinal watertightness of the cable is provided by a hydrophobic gel


Loose tube cable. Central strength member is made of fiber reinforced plastic (FRP) rod. Polymer tubes and plastic fillers are SZ-stranded around central strength member. Optical fibers are placed inside polymer tubes. Interstice inside polymer tubes and between them is filled with hydrophobic filler. Cable core is wrapped by yarns. PET-tape is imposed on the cable core.Fiberglass yarn layer covers cable core. High density polyethylene jacket forms around yarn layer.

On customer’s request cable design can have following options:

  1. Production of «dry» construction (water blocking yarns instead of hydrophobic filler).
  2. Change of the standard color of polymer modules and fibers.
  3. Number of fibers up to 288.


Number of fibers2-5052-9698-144
Number of polymer tubes 5 6 6
Number of optical fibers in a tube up to 10 up to 16 up to 24
Long-term permissible tensile force , kN 7 7 7
Nominal overall diameter, mm 11,5 11,7 13,4
Total mass of cable with polyethylene jacket, kg/km 108 118 146

Operational requirements:

Temperature range of operation, С° -60… +70
Temperature range of installation, С° -30… +50
Transport, storage, С° -60… +60
Minimal bending radius not less than 20 diameters
Lifetime 25 years
Guarantee exploitation 2 years after putting in operation, not more than 2,5 years from shipping date
Tensile strength from 3,0 kN to 10,0 kN
Crush strength not less than 3 kN /100 mm

Documentation is on request

Back to directory